Sidewinder Rugged PTZ Traffic Camera | WTI

WTI Sidewinder Rugged PTZ Camera

Purpose-built for demanding transportation and infrastructure environments. Twenty years deployed on U.S. roads, with an 11.8-year mean time between failures.

  • IP68 / NEMA 4X
  • NEMA TS2
  • -40°F to +165°F
  • PoE++
  • BABA Compliant
  • Made in USA
Two WTI Sidewinder VS265-R PTZ cameras, one showing the Sidewinder emblem on the lens tube
PROVEN ON THE ROAD
20-year
track record
Two decades of Sidewinder deployments with state DOTs, from urban intersections to high-speed highways.
BUILT TO LAST
11+ years
before failure
11.8-year mean time between failures. All-aluminum IP68 housing, every camera water-tested before it leaves Ventura.
SELF-CLEANING GLASS
No wiper
needed
Hydrophilic coated, direct-heated window sheds water and debris. Nothing to wear out or service.
ITS STANDARDS
Drop-in
replacement
Fits existing poles, arms, and plates. ONVIF, NTCIP, Pelco-D, COHU, and Bosch protocol support.
Sidewinder PTZ camera on a side-of-pole mount monitoring a signalized intersection

Key Features

Learn about our technology in depth →

Precision PTZ

  • Continuous 360° pan and tilt
  • 0.05° preset repeatability
  • 150°/second movement
  • Configurable presets, tours, and zones

Rugged Environmental Design

  • -40°F to +165°F operating range
  • IP68 and NEMA 4X, all-aluminum housing
  • ASTM B117 salt fog
  • NEMA TS2 compliant

Optical Performance

  • 1080p, Sony STARVIS CMOS
  • 30x optical zoom
  • Wide Dynamic Range and DeFog
  • Electronic Image Stabilization

Low-Maintenance Visibility

  • Hydrophilic coated window — no wiper required
  • Direct-heated window
  • Closed-loop heater control
  • Heated enclosure with de-fog

Network & ITS Integration

  • ONVIF and NTCIP
  • Pelco-D, COHU, Bosch
  • WTI protocols
  • PoE++ power

Camera Health Monitoring

  • Internal temperature monitoring
  • Internal humidity monitoring
  • Configurations: analog, military, AC, PoE++, side egress
  • AI analytics included as standard
Rain sheeting off the Sidewinder hydrophilic window

VS265-R Specifications

From the WTI VS265-R datasheet and company overview. Refer to the datasheet for complete specifications; subject to change without notice.

Download Datasheet
IMAGING
Resolution
1080p (1080p60)
Sensor
Sony STARVIS CMOS
Optical zoom
30x
Image processing
Wide Dynamic Range (WDR), DeFog, Electronic Image Stabilization
PTZ
Pan / tilt
Continuous 360° pan and tilt
Preset repeatability
0.05°
Speed
150°/second
Presets, tours, zones
Fully configurable via WTI Camera Control Software
WINDOW
Window coating
Hydrophilic self-cleaning, no wiper required
Heating
Direct-heated window with closed-loop heater control; heated enclosure; de-fog
ENVIRONMENTAL
Operating temperature
-40°F to +165°F (-40°C to +74°C)
Ingress protection
IP68, every camera submersion tested before delivery
Enclosure rating
NEMA 4X
Salt fog
ASTM B117
Traffic standard
NEMA TS2
Housing
All-aluminum
POWER
Power
PoE++ (IEEE 802.3bt); AC and analog configurations available
NETWORK
Protocols
ONVIF, NTCIP, Pelco-D, COHU, Bosch, WTI protocols
MONITORING
Camera health
Internal temperature and humidity monitoring
CONFIGURATIONS
Versions
Analog, military, AC, PoE++, side egress
ANALYTICS
AI analytics
Standard on all models: counting by class, line crossing, stopped-vehicle, wrong-way, zone dwell, directional counts, calibrated speed
MECHANICAL
Mounting
ITS standard mounting; riser, square plate, pole top, adjustable pole top, side of pole, horizontal pole options
RELIABILITY
MTBF
11.8 years mean time between failures
COMPLIANCE
Domestic content
BABA compliant, no waiver required; manufactured in Ventura, California
WTI Sidewinder PTZ camera operating in falling snow

Built for extreme climates

Rated from -40°F to +165°F, with a heated window and enclosure that keep the view clear through snow, ice, and fog.

-40°F
+165°F
Operating temperature (-40°C to +74°C)
IP68Ingress protection, submersion tested on every unit
NEMA 4XCorrosion-resistant enclosure rating
ASTM B117Salt fog exposure
NEMA TS2Traffic controller environmental standard

Integration and Protocols

Sidewinder speaks the protocols used across ITS video networks and drops into existing mounting infrastructure. Pair it with the Hydra transcoder to cut backhaul bandwidth by up to 75%, and the Striker injector for 90 W PoE++ at the cabinet.

PROTOCOLS
ONVIFNTCIPPelco-DCOHUBoschWTI protocols
POWER & VIDEO
PoE++ (IEEE 802.3bt)AC variantAnalog variant1080p IP video
SOFTWARE

WTI Camera Control Software 3.10.0 for configuration, presets, tours, and zones. Download from Support →

Related Products

WTI Striker PoE++ power injector

Striker PoE++ Injector

90 W IEEE 802.3bt mid-span power, NEMA TS2, -40°C to +74°C.

WTI Hydra video transcoder

Hydra Video Transcoder

H.264/H.265 transcoding, up to 75% bandwidth savings.

WTI SWM-SP side of pole mount with 12 inch arm

Mounting Options

Riser, square plate, pole top, adjustable pole top, side of pole, horizontal pole.

Need Help Specifying This Product?

WTI engineers can help with spec language, mounting, power, and network integration for your project.